Skip to main content

Resistance Welding Equipment Market Pegged for Robust Expansion During 2017-2025

Resistance Welding Equipment Market: Introduction
Resistance welding equipment market is estimated to grow due to growing demand of resistance welding in automotive and manufacturing industries. Resistance welding equipment is utilized for the purpose of joining two or more metal sheets and components permanently. Resistance welding is one of the oldest type of electric welding. In the process, the weld is made by a combination of time, pressure and heat. There are many different types of resistance welding processes such as flash welding, percussion welding, projection welding, resistance spot welding etc. Resistance welding equipment have welding forces ranging from fractional pounds to over 1,000,000 pounds force and current output ranges from a few amperes to over 200,000 amperes. In Resistance welding, no flux is needed such as solder during the welding process, this is the reason that welded parts can be easily recycled. Moreover, spatter and ultraviolet rays are not generated which keeps the worksite neat and clean.
Resistance Welding Equipment Market: Market Dynamics
Increasing adoption rate of resistance welding in automotive and appliance industries for manufacturing process is one of the main factor fueling the growth of resistance welding equipment market. Resistance welding has many advantages as no training is required to improve the welder’s skill unlike in arc and gas welding, owing to easy operation. It is suitable for high volume production for low cost products in a short period of time. Subsequently, due to its short time duration, less heat is transferred over the non-work area of the work piece. Moreover, no filler metals or consumables are required for joining or welding of metal sheets & components and it is environment friendly clean process. These are some reasons which are anticipated to the growth of resistance welding equipment market during the forecast period.
Request For Report Sample@ https://www.persistencemarketresearch.com/samples/18820
Resistance welding is more expensive than arc welding equipment. It is one of the key factor that can hamper the growth of resistance welding equipment market. Resistance spot welding has low fatigue & tensile strength and also have limited movement on assembly line. These are some other factors that hinder the growth of resistance welding equipment market. Furthermore, slow adoption of advanced welding technologies in the developing regions acts as restraint for the said market.
In current scenario, Semi-automatic and automatic resistance welding equipment are used by end use industry instead of manual resistance welding equipment, owing to easy operating and time saving facility. Steel industry is using the semi-automatic and automatic resistance welding equipment for manufacturing of pipe, tubing and smaller structural section. Among all end use industry, automotive industry is the prominent user of resistance welding equipment.
Resistance Welding Equipment Market: Segmentation
Resistance Welding Equipment Market can be segmented on the basis of automation level and End Use.
On the basis of automation level it can be segmented into:
  • Manual Resistance Welding Equipment
  • Semi – Automatic Resistance Welding Equipment
  • Automatic Resistance Welding Equipment
On the basis of End Use it can be segmented into:
  • Automotive Industry
  • Electronic Industry
  • Steel Industry
  • Aerospace Industry
  • Others
Request For Report Table of Content (TOC): https://www.persistencemarketresearch.com/toc/18820
Resistance Welding Equipment Market: Regional Overview
Resistance welding equipment market in Western Europe is expected to grow with significant CAGR, owing to high number of automobile manufacturers. Asia Pacific excluding Japan is estimated to account prominent market share for resistance welding equipment market due to industrial growth observed in the emerging economies such as India and China during the forecast period. Japan is also estimated to hold significant market share, owing to growing electronic industry in the region. Moreover, North America is anticipated for the growth of resistance welding equipment market due to high adoption rate of advanced welding technologies. Resistance welding equipment market in Middle East and Africa is expected to grow with moderate rate in the upcoming year.
Resistance Welding Equipment Market: Market Participants
Examples of some of the market participants identified across the value chain of the global Resistance Welding Equipment Market includes:
  • Langley Holdings PLC (ARO Welding Technologies SA)
  • NIMAK GmbH
  • Fronius International GmbH
  • J. Snow
  • Taylor-Winfield Technologies, Inc.
  • CenterLine (Windsor) Limited
  • Daihen Corporation
  • Welding Process Industrial Co., Ltd
  • TECNA S.p.A.
  • Heron Intelligent Equipment Co.,Ltd
  • Shenzhen Juntengfa Welding Equipment Co., Ltd
  • PW Resistance Welding Products Ltd.
Know More About Report@ https://www.persistencemarketresearch.com/market-research/resistance-welding-equipment-market.asp

Comments

Post a Comment

Popular posts from this blog

Covaxin vs Covishield: A Comparison between the Covid-19 Vaccines of India

  The second wave of Covid-19 pandemic has reminded people the hard times faced during the coronavirus outbreak in 2020 in India. However, there is still an upper hand in 2021 in the fight against Covid-19, and this can be attributed to the nationwide vaccination drive. It has been clear that getting vaccinated is one of the simple yet effective ways to combat the pandemic. Vaccination helps in producing antibodies and boosts the immune system to fight against any infection. Besides, getting Covid-19 vaccination is known to reduce the severity of the infection and helps in lowering the chances of getting hospitalized due to the severe infection caused due to Covid-19. Covaxin Vs Covishield Currently, the Indian Government has approved two vaccines namely Covaxin and Covishield to fight Covid-19. Many people are wondering which vaccine is better among the two, and here is a quick read to help them answer all their queries. Covaxin Covaxin was given approval for by the Indian
Post a Comment
Read more

Contactless Payment Market size share growth analysis market demand

  Contactless payment, also called as a tap-and-go system is a secure mode where the transactions are done using technologies such as NFC (near field communication), RFID (radio frequency identification), infrared, and bluetooth. Contactless payment is hassle-free and convenient for customers as it takes only one-tenth of the time taken by the old-style electronic transaction.Contactless payment is becoming popular owing to its benefits such as secure and fast payments without any need for cash or identifying details. Initially, these type of payments or cards were used for the purpose oftravelling tickets only. But today, this technology has evolved and is helping customers to make payments for almost anything. However, the permissible amount for a contactless payment varies by country and by the bank. Access to PDF Sample Report Here! @  https://www.researchdive.com/download-sample/181 Recent Developments in the Contactless Payment Industry As per a Research Dive blog,  the digital e
2 comments
Read more

Development: Aerospace 3D Printing Market Strategy Planning by Top Manufacturers

  Aerospace 3D Printing Market Analysis 2026: According to a study of the Research Dive,  aerospace 3D printing market  forecast shall cross  $5,933.4 million by 2026 , growing at a  CAGR of 26.8%  during forecast period. Aerospace 3D printing is primarily used to increase the efficiency of A&D supply chain, reduction of storage costs of inventory and waste production materials. Furthermore, the Aerospace 3D printing industry is focusing more on creating parts of aircraft that are lighter and stronger than parts made by using traditional manufacturing. Astonishing advantages of 3D printings in the supply chain of the aerospace and defense industry are projected to surge in the global market. In addition, the financial support provided by the government and non-government organizations across the globe is also driving the 3D printing in aerospace industry. For instance,   National Aerospace Technology Exploitation Programme grants £140,000 funds for UK based company Sigma Components
Post a Comment
Read more